当前位置： 首页 > news >正文

Windows下编译SALOME

news 2025/5/4 21:18:26

本文以笔记的形式记录在Windows下编译SALOME的流程。

零、环境

操作系统WIndows 10
Visual StudioVisual Studio 2022 Community
Visual Studio Code1.92.1
CMakeCMake-3.24.2

一、工具及依赖

 1.1 VS Code

下载并安装Visual Studio Code, 同时安装以下插件，

Task Explorer

Output Colorizer

Git Extension Pack

Git Graph

Remote Developement

Remote X11

Code Runner

Modern Fortran

FORTRAN InstelliSense

Fortran Breakpoint Support

C/C++ Extension Pack

C++ TestMate

Python Extension Pack
C# Dev Kit
Extension Pack for Intel Software Developer Tools
Nsight Visual Studio Code Edition

1.2 VCPKG

下载vcpkg到D:\，并完成配置

git clone https://github.com/Microsoft/vcpkg.git
cd D:\vcpkg
mkdir D:\vcpkg\binary-cache
mkdir D:\vcpkg\asset-cache
set "VCPKG_BINARY_SOURCES=clear;files,D:\vcpkg\binary-cache,readwrite"
set "X_VCPKG_ASSET_SOURCES=clear;x-azurl,file://D:/vcpkg/asset-cache,,readwrite"
bootstrap-vcpkg.bat

 注意：限于从国外网站下载速度较慢，考虑使用代理，

set "HTTP_PROXY=http://192.168.X.X:7890"
set "HTTPS_PROXY=http://192.168.X.X:7890"

通过vcpkg可以方便的安装第三方库，常用命令如下表

安装packagevcpkg install <package-name>
搜索packagevcpkg search <package-name>
已安装packagevcpkg list

然后，按照下表安装第三方依赖库

PackageDescription
pythonvcpkg install python3
pthreadvcpkg install pthread
cppunitvcpkg install cppunit
boostvcpkg install boost
qt
occ
vtk

二、下载SALOME

由于SALOME每个模块采用了单独的Git仓库进行代码托管，因此，需要手动下载SALOME相关模块。

新建fetch-salome.sh文件，并添加以下内容，

git clone https://github.com/SalomePlatform/.github.git
git clone https://github.com/SalomePlatform/adao.git
git clone https://github.com/SalomePlatform/adao_interface.git
git clone https://github.com/SalomePlatform/blsurfplugin.git
git clone https://github.com/SalomePlatform/calculator.git
git clone https://github.com/SalomePlatform/common_geometry_lib.git
git clone https://github.com/SalomePlatform/component.git
git clone https://github.com/SalomePlatform/configuration.git
git clone https://github.com/SalomePlatform/datafiles.git
git clone https://github.com/SalomePlatform/documentation.git
git clone https://github.com/SalomePlatform/eficas.git
git clone https://github.com/SalomePlatform/eficas_tools.git
git clone https://github.com/SalomePlatform/geom.git
git clone https://github.com/SalomePlatform/ghs3dplugin.git
git clone https://github.com/SalomePlatform/gmshplugin.git
git clone https://github.com/SalomePlatform/gui.git
git clone https://github.com/SalomePlatform/hello.git
git clone https://github.com/SalomePlatform/hexablock.git
git clone https://github.com/SalomePlatform/hexablockplugin.git
git clone https://github.com/SalomePlatform/hexoticplugin.git
git clone https://github.com/SalomePlatform/homard.git
git clone https://github.com/SalomePlatform/hybridplugin.git
git clone https://github.com/SalomePlatform/jobmanager.git
git clone https://github.com/SalomePlatform/kernel.git
git clone https://github.com/SalomePlatform/libbatch.git
git clone https://github.com/SalomePlatform/med.git
git clone https://github.com/SalomePlatform/MEDCoupling_tutos.git
git clone https://github.com/SalomePlatform/medreader.git
git clone https://github.com/SalomePlatform/medcoupling.git
git clone https://github.com/SalomePlatform/meshbooleanplugin.git
git clone https://github.com/SalomePlatform/mmgplugin.git
git clone https://github.com/SalomePlatform/netgenplugin.git
git clone https://github.com/SalomePlatform/openturns_salome.git
git clone https://github.com/SalomePlatform/paravis.git
git clone https://github.com/SalomePlatform/paravisaddons_common.git
git clone https://github.com/SalomePlatform/pmml.git
git clone https://github.com/SalomePlatform/py2cpp.git
git clone https://github.com/SalomePlatform/pycalculator.git
git clone https://github.com/SalomePlatform/pyhello.git
git clone https://github.com/SalomePlatform/SALOME.git
git clone https://github.com/SalomePlatform/salome_bootstrap.git
git clone https://github.com/SalomePlatform/sat.git
git clone https://github.com/SalomePlatform/sat_salome.git
git clone https://github.com/SalomePlatform/shaper.git
git clone https://github.com/SalomePlatform/shaper_study.git
git clone https://github.com/SalomePlatform/smesh.git
git clone https://github.com/SalomePlatform/solverlab.git
git clone https://github.com/SalomePlatform/top_ii_vol.git
git clone https://github.com/SalomePlatform/yacs.git
git clone https://github.com/SalomePlatform/yacsgen.git
git clone https://github.com/SalomePlatform/ydefx.git

在fetch-salome.sh所在目录，右键启动Git Bash，然后运行上述脚本，下载相关模块代码，

sh ./fetch-salome.sh

注1：国内访问GitHub需要通过'https_proxy'环境变量设置网络代理。

export https_proxy=http://X.X.X.X:7890

三、编译salome_bootstrap

3.1 CMake配置

VariableValue
ABS_APPLI_PATHD:/YouQuan/CaeFrameworks/SALOME/VS2022SALOMEBOOTSTRAP
WRAP_PYTHONOFF

四、编译kernel

4.1 CMake配置

VariableValue
CMAKE_INSTALL_PREFIXD:/YouQuan/CaeFrameworks/SALOME/VS2022KERNEL
SALOME_LIGHT_ONLYON
SALOME_BUILD_TESTSOFF
SALOME_BUILD_DOCOFF
PTHREAD_LIBRARIES
OMNIORB_ROOT_DIR
OMNIORB_LIBRARY_COS4
OMNIORB_LIBRARY_COSDynamic4
OMNIORB_LIBRARY_omniDynamic4
OMNIORB_LIBRARY_omniORB4
OMNIORB_LIBRARY_omnithread
CPPUNIT_LIBRARIES

五、编译gui

5.1 CMake配置

VariableValue
CMAKE_INSTALL_PREFIXD:/YouQuan/CaeFrameworks/SALOME/VS2022/GUI

附录Ⅰ：VS2022.bat

新建"D:\YouQuan\CaeFrameworks\SALOME\SOURCES\VS2022.bat"文件，添加以下内容,

@echo off:: SALOME SOURCES Root
set SALOME_SRCS_ROOT=%cd%
:: VCPKG Root
set VCPKG_ROOT=D:/vcpkg
:: Path to toolchain file supplied to CMake
set CMAKE_TOOLCHAIN_FILE=%VCPKG_ROOT%/scripts/buildsystems/vcpkg.cmakeset INCLUDE=%VCPKG_ROOT%/installed/x64-windows/include;%INCLUDE%
set LIB=%VCPKG_ROOT%/installed/x64-windows/debug/lib;%LIB%
:: Add the path of your MinGW-w64 bin folder to the Windows PATH environment variable
set PATH=%VCPKG_ROOT%/installed/x64-windows/debug/bin;%PATH%:: Packages
set CPPUNIT_ROOT_DIR=%VCPKG_ROOT%/installed/x64-windows
set BOOST_ROOT_DIR=%VCPKG_ROOT%/installed/x64-windows
set PTHREAD_ROOT_DIR=%VCPKG_ROOT%/installed/x64-windows
set PYTHON_ROOT_DIR=%VCPKG_ROOT%/installed/x64-windows:: Modules
set CONFIGURATION_ROOT_DIR=%cd%/configuration
set CPPUNIT_ROOT_DIR=%MinGW64_ROOT%:: Open VS Code in the current working folder
code .vscode/salome.code-workspace

 附录Ⅱ: VS Code Multi-root workspaces

新建"D:\YouQuan\CaeFrameworks\SALOME\SOURCES\.vscode\salome.code-workspace"文件，添加以下内容,

{"folders": [{"path": "../configuration"},{"path": "../.github"},{"path": "../adao"},{"path": "../adao_interface"},{"path": "../blsurfplugin"},{"path": "../calculator"},{"path": "../common_geometry_lib"},{"path": "../component"},{"path": "../datafiles"},{"path": "../documentation"},{"path": "../eficas"},{"path": "../eficas_tools"},{"path": "../geom"},{"path": "../ghs3dplugin"},{"path": "../gmshplugin"},{"path": "../gui"},{"path": "../hello"},{"path": "../hexablock"},{"path": "../hexablockplugin"},{"path": "../hexoticplugin"},{"path": "../homard"},{"path": "../hybridplugin"},{"path": "../jobmanager"},{"path": "../kernel"},{"path": "../libbatch"},{"path": "../med"},{"path": "../medcoupling"},{"path": "../MEDCoupling_tutos"},{"path": "../medreader"},{"path": "../meshbooleanplugin"},{"path": "../mmgplugin"},{"path": "../netgenplugin"},{"path": "../openturns_salome"},{"path": "../paravis"},{"path": "../paravisaddons_common"},{"path": "../pmml"},{"path": "../py2cpp"},{"path": "../pycalculator"},{"path": "../pyhello"},{"path": "../SALOME"},{"path": "../salome_bootstrap"},{"path": "../sat"},{"path": "../sat_salome"},{"path": "../shaper"},{"path": "../shaper_study"},{"path": "../smesh"},{"path": "../solverlab"},{"path": "../top_ii_vol"},{"path": "../yacs"},{"path": "../yacsgen"},{"path": "../ydefx"},{"path": "."}],"settings": {}
}

附录Ⅲ: c_cpp_properties.json

新建"D:\YouQuan\CaeFrameworks\SALOME\SOURCES\.vscode\c_cpp_properties.json"文件，添加以下内容,

{"configurations": [{"name": "MSVC","includePath": ["${workspaceFolder}/**"],"defines": ["_DEBUG","UNICODE","_UNICODE"],"windowsSdkVersion": "10.0.19041.0","compilerPath": "cl.exe","cStandard": "c17","cppStandard": "c++17","intelliSenseMode": "windows-msvc-x64","configurationProvider": "ms-vscode.cmake-tools"},{"name": "MinGW-w64","includePath": ["${workspaceFolder}/**","D:/msys64/mingw64/include"],"defines": [],"compilerPath": "D:/msys64/mingw64/bin/g++.exe","cStandard": "c17","cppStandard": "c++17","intelliSenseMode": "windows-gcc-x64","configurationProvider": "ms-vscode.cmake-tools","compilerPathInCppPropertiesJson": "D:/msys64/mingw64/bin/g++.exe","configurationProviderInCppPropertiesJson": "ms-vscode.cmake-tools","mergeConfigurations": false,"browse": {"path": ["D:/msys64/mingw64/include","${workspaceFolder}"],"limitSymbolsToIncludedHeaders": true}},{"name": "Mac","includePath": ["${workspaceFolder}/**"],"defines": [],"macFrameworkPath": ["/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks"],"compilerPath": "/usr/bin/clang","cStandard": "c17","cppStandard": "c++17","intelliSenseMode": "macos-clang-arm64"},{"name": "Linux-GCC","includePath": ["${workspaceFolder}/**"],"defines": [],"compilerPath": "/usr/bin/g++","cStandard": "c17","cppStandard": "c++17","intelliSenseMode": "gcc-x64","browse": {"path": ["${workspaceFolder}"],"limitSymbolsToIncludedHeaders": true,"databaseFilename": ""}}],"version": 4
}

附录Ⅳ: cmake-kits.json

新建"D:\YouQuan\CaeFrameworks\SALOME\SOURCES\.vscode\cmake-kits.json"文件，添加以下内容,

[{"name": "MinGW-64","compilers": {"C": "D:\\msys64\\mingw64\\bin\\gcc.exe","CXX": "D:\\msys64\\mingw64\\bin\\g++.exe"},"isTrusted": true,"environmentVariables": {"CMT_MINGW_PATH": "C:\\msys64\\mingw64\\bin","MSYSTEM": "MINGW64","MSYSTEM_PREFIX": "/mingw64","PATH": "D:\\msys64\\mingw64\\bin;D:\\msys64\\usr\\bin;${env:PATH}"},"preferredGenerator": {"name": "MinGW Makefiles"}},{"name": "GCC 11.4.0 x86_64-linux-gnu","compilers": {"C": "/usr/bin/gcc","CXX": "/usr/bin/g++"},"isTrusted": true},{"name": "Intel(R) oneAPI DPC++/C++ Compiler 2024.2.1","compilers": {"C": "/opt/intel/oneapi/compiler/2024.2/bin/icx","CXX": "/opt/intel/oneapi/compiler/2024.2/bin/icpx"},"isTrusted": true}

附录V: CMakeUserPresets.json

新建"D:\YouQuan\CaeFrameworks\SALOME\SOURCES\CMakeUserPresets.json"文件，添加以下内容,

{"version": 4,"cmakeMinimumRequired": {"major": 3,"minor": 20,"patch": 0},"configurePresets": [{"name": "mingw64","hidden": false,"displayName": "MinGW-w64","description": "This build is using MinGW generator","generator": "MinGW Makefiles","binaryDir": "${sourceDir}/out/build/${presetName}","cacheVariables": {"CMAKE_INSTALL_PREFIX": "${sourceDir}/out/install/${presetName}",                "CMAKE_BUILD_TYPE": "Debug"},"environment": {}},{"name": "linux_gcc","hidden": false,"displayName": "Linux GCC","description": "Default build using Unix Makefiles generator","generator": "Unix Makefiles","binaryDir": "${sourceDir}/out/build/${presetName}","cacheVariables": {"CMAKE_INSTALL_PREFIX": "${sourceDir}/out/install/${presetName}","CMAKE_C_COMPILER": "/usr/bin/gcc","CMAKE_CXX_COMPILER": "/usr/bin/g++","CMAKE_MAKE_PROGRAM": "/usr/bin/make","CMAKE_BUILD_TYPE": "Debug"},"environment": {}}],"buildPresets": [{"name": "mingw64","displayName": "MinGW-w64","configurePreset": "mingw64"},{"name": "linux_gcc","displayName": "Linux GCC","configurePreset": "linux_gcc"}],"testPresets": [{"name": "mingw64","displayName": "MinGW-w64","configurePreset": "mingw64"},{"name": "linux_gcc","displayName": "Linux GCC","configurePreset": "linux_gcc"}]
}

 参考资料

SALOME

VS Code Multi-root workspaces


http://www.mrgr.cn/news/97990.html

相关文章：

  • AI大模型学习六：‌小米8闲置，通过Termux安装ubuntu做个随身服务器
  • UE的AI判断队伍归属的机制：IGenericTeamAgentInterface接口
  • 代码随想录第15天：（二叉树）
  • 图书管理系统（Python）
  • 嵌入式---电机分类
  • ESP32S3 链接到 WiFi
  • Java学习手册：面向对象编程核心概念
  • 剑指Offer（数据结构与算法面试题精讲）C++版——day12
  • AutoEval：现实世界中通才机器人操作策略的自主评估
  • Python爬虫第13节-解析库pyquery 的使用
  • 题目 2701: 蓝桥杯2022年第十三届决赛真题-取模（C/C++/Java组）
  • 谷歌最近放出大招——推出全新“Agent Development Kit（简称ADK）
  • Windows 图形显示驱动开发-WDDM 2.0功能_上下文监视
  • 嵌入式---烧录器
  • 使用Python从零实现一个端到端多模态 Transformer大模型
  • 蓝桥杯篇---客观题
  • 代码大模型的发展：通义灵码与KwaiCoder的技术探讨
  • ASEG的鉴定
  • RK3568 基于Gstreamer的多媒体调试记录
  • 为什么Java不支持多继承？如何实现多继承？